|
   
Overhead Traveling Crane
Crane
Operator Pre-Shift
Inspection
Overhead and gantry cranes must be inspected according to
the procedure in ANSI/ASME B30.2, Overhead and Gantry Cranes. And O.S.H.A.
1910.179
|
Crane Location
|
Serial Number
|
Capacity |
Type |
Operator |
Date |
|
|
|
|
|
|
|
Pre-Shift Operation Checklist
|
Item Inspected |
Requires Repair or Attention |
OK |
|
Safety: Emergency Stop Switch, Runway disconnect |
|
|
|
Controller: Check for sticking or binding |
|
|
|
Controller: Check for correct directional motions and
ID markings |
|
|
|
Test Run: Observe operation for smoothness and note
any malfunction(s)etc. |
|
|
|
Brakes: Observe operation for excessive drift. |
|
|
|
Limits: Test all limits without a load |
|
|
|
Wire Rope/Chain: Check for damaged, proper seating in
grooves and sheaves |
|
|
|
Load block: Bent, broken, missing, loose, Capacity
markings |
|
|
|
Load attachments: Bent, broken, missing, loose,
Capacity markings |
|
|
|
Lubrication: leaks |
|
|
|
Warning Devices/Lights: Warning or signal, broken or
burned out |
|
|
|
Wheels: Worn, indicated by bumpy riding, scraping
noises |
|
|
|
Parts (Bolts, covers, wires, etc.)? Loose, missing
etc. |
|
|
|
General: Note any other potential Safety Hazards
Observed. |
|
|
Monthly Inspection Checklist
Hooks, Wire Rope and Chains must be inspected in
accordance with the procedure in ANSI/ASME.
|
Item Inspected Monthly |
Signature |
Condition |
Date |
|
1. Hooks |
|
|
|
|
2. Wire Rope or Chain |
|
|
|
|
